Stopping Virtuozzo Storage iSCSI Targets

To stop a Virtuozzo Storage iSCSI target to which no initiators are connected, use the pstorage-iscsi stop command. For example, for the target iqn.2014-04.com.pstorage:test1:

# pstorage-iscsi stop -t iqn.2014-04.com.pstorage:test1

If one or more iSCSI initiators are still connected to the target, you will be informed as follows:

# pstorage-iscsi stop -t iqn.2014-04.com.pstorage:test1

initiators still connected

Initiator: iqn.1994-05.com.redhat:c678b9f6f0 (192.168.30.100)

Unable stop target iqn.2014-04.com.pstorage:test1

In this case, disconnect the iSCSI initiator according to the product manual and run the pstorage-iscsi stop command again.

To forcibly stop a target to which one or more initiators are still connected, add the -f option to the command above. For example:

# pstorage-iscsi stop -t iqn.2014-04.com.pstorage:test1 -f

Breaking the iSCSI connection in such a way may result in I/O errors on the iSCSI initiator's side.